Custom Parts for your Motorcycle
Cart 0
Motogadget mo.Relay+

Motogadget mo.Relay+

€92,95

The PLUS is where it's at!
The mo.Relay+ purposefully combines a load independent digital flasher relay and electronic push-button controller. 

Depending on how long the respective turn signal push-button is activated, 4 different operating modes are available:

  1. a) Change of lane: Short tap on push-button - blink 3x and automatic switch-off
    b) Turn: Pressing push-button shortly - blink 10x and automatic switch-off
    c) Continuous flashing: Pressing push-button longer - switching off only after pressing the push-button repeatedly
    d) The m.Relay+ is equipped with a hazard flasher function - activated by pressing both push-buttons simultaneously

The mo.Relay+ is load independent (1-100 W) and provides a constant flasher frequency to almost all models of LED, micro or halogen turn signal lights as well as 10 or 21 W light bulbs. Immediate, loss free and brighter illumination results from the effective microelectronic.

The light and compact aluminum casing is anodized black and features a M3 mounting thread. Removable mounting with cable ties is also possible. Ideal for mods and custom bikes with restricted mounting space. The electronics are water-tight, vibration resistant and are equipped with an overload protection.

Attention: If you are looking for a flasher relay WITHOUT push-button controls please refer to our mo.Flash or mo.Wave series!

Attention: If you are looking for a flasher relay WITHOUT push-button controls but with automatic deactivation please refer to our mo.Stop series!
Attention: If you are looking for fully featured push-button controls with lots of additional features, please refer to our mo.Unit series!

Dimensions

Diameter 20 mm (without cable), height  21.5 mm

All advantages summarized

Very compact, light and easy to mount

Ideal for custom bikes and mods with little mounting space - bulky conventional relays or load resistors are a thing of the past

No additional push-button control unit necessary

Intuitive time control and automatic deactivation

Almost load independent (min. 1 Watt)

Completely implemented using digital semiconductor technology. microprocessor controlled No mechanical workings, no spools, no electrical contacts

Constant and correct flasher frequency and suited for almost all LED turn signal lights, all micro and halogen turn signal lights as well as all 10-watts and 21-watts turn signal lights e. g. works with 4 turn signal lights or 2 handlebar end turn signal lights

Immediate loss free and brighter illumination of all turn signal lights

Completely watertight and vibration resistant because of the molded-in construction

Short circuit proof, automatic overload protection, switches power up to 100 W.

No heat generation while operating

Only 5 - 18 V operating voltage required

Made in Germany- by Motogadget

.  

Usually ships in 4-6 days

 

 


Share this Product


More from this collection